Marquis C728 Specifications.

Supermicro X7DWA-N workstation board, E-ATX form factor

Intel Quad Core Xeon processors (Harpertown), 6M+6M full speed L2 cache, 1333MHz or 1600mhz Quad Pumped FSB, Core micro-architecture, HyperThreading (SMT), EM64T, Socket LGA771

Intel 5400 (Seaburg) chipset
Intel ESB2 Enterprise Southbridge and PCI-X Hub (PXH-V)
ESB2 6-port SATA II controller with HostRAID1
Single Ultra ATA/100 IDE controller supporting two UDMA devices
Texas Instruments IEEE1394a Firewire controller

Memory Subsystem:
Eight 240-pin DIMM banks supporting up to 32GB DDR2-800 ECC FB-DIMM memory, 800mhz2, 128-bit memory bus

Note: Quad channel memory requires 4 or 8 modules.

Graphic Subsystem:
ASUS EN7200GS/HTD/256M, Nvidia® GeForce 7200GS, PCI-Express x16, 256MB DDR2, 450MHZ core, 333mhz DDR memory, 400Mhz RAMDAC, one digital port (DVI-I), one analog port (DB-15), TV-Out (SVHS), dual head display

Hard Disk Subsystem:
(C728-T/TR2) Up to four Serial ATA II hard drives in capacity from 80GB to 2TB. These drives can be configured as standalone, software RAID (728-T) or hardware RAID (728-TR2)

(C728-SS) Up to four SAS hard drives in capacity from 36GB to 450GB. These drives can be configured as standalone or software RAID

SCSI Subsystem:
(C728-SS) LSI SAS3041-R 4-port PCI-X SAS controller

(C728-TR2) 3Ware Escalade 9650SE-4LPML Serial ATA II RAID controller, RAID level 0, 1, 5, 10 & JBOD, PCI-Express x4, 256MB DDR2-533 ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
20X DVD+-RW dual layer optical burner, Serial ATA interface

Sound Subsystem:
Onboard Realtek ALC883 7.1 AC'97 audio CODEC

Network Subsystem:
Onboard Intel 82575EB Dual port PCI-Express Gigabit Ethernet controllers, 1000BaseTX, RJ-45
Optional SIMLP in-band and out-of-band remote server management (over LAN, IPMI 2.0)

System Slots:
Two (2) PCI Express x16 (v2.0) slots (x16 signal)
Two (2) 64-bit/100/133MHz bus mastering PCI-X slots, 3.3V
Two (2) 32-bit/33MHz bus mastering PCI slots, 3.3V
One (1) UIO slot

System I/O:
One (1) ECP/EPP Bi-directional parallel port
One (1) RS-232C 16550 serial port
Four (4) USB 2.0 ports (rear access)
Two (2) USB 2.0 ports (front access)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) Line in, MIC, and Speaker port
One (1) S/P DIF Out port
Two (2) RJ-45 Ethernet ports

Floppy Drive:
1.44M 3.5-inch drive3

Logitech Optical Wheel Mouse, PS/2

Keytronic KT-2000 104-key PS/2 keyboard

E-ATX Mid Tower case, FCC Class B, black bezel (standard) / beige (optional)
Chassis Images:
     Front View, Front View w/ Hotswap Backplane
Security locks for the front panel and side panel
800W EPS12V green power supply with active PFC
Three (3) accessible 5.25" drive bays
SAS backplane supporting four hotswap hard drives
One (1) 12cm exhaust fan, ball bearing, 4-pin PWM
One (1) 9cm front fan, ball bearing, 4-pin PWM
One (1) 8cm HD cooling fan, ball bearing
One (1) exhaust air duct for the memory slots
Active CPU heatsinks with 4-pin PWM fans
Dimensions: 533mm (D) x 198mm (W) x 425mm (H)

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system

  1. HostRAID function is not supported under Linux.
  2. Require processors running at 1600mhz Front Side Bus.
  3. Floppy drive occupies one of the 5.25in drive bay.
Phone: 1.877.ASL.3535