Sovereign 2893 Specifications.
Motherboard:
(2893-SR) Supermicro X10DRi server board
(2893-SRT) Supermicro X10DRi-T server board
CPU:
Intel Xeon E5-2600 v4 series processors, up to 22 cores, up to 9.6GT/s QuickPath Interconnect, Broadwell-EP core, HyperThreading (SMT), Socket LGA2011-3
Intel Xeon E5-2600 v3 series processors, up to 18 cores, up to 9.6GT/s QuickPath Interconnect, Haswell-EP core, HyperThreading (SMT), Socket LGA2011-3
Chipset:
Intel C612 server chipset
Memory Subsystem:
Sixteen (16) 240-pin DIMM banks supporting up to 1TB DDR4 ECC registered memory, 8 memory slots per CPU bank, Dual channel memory bus
Note: Dual channel configuration requires 2, 4, 6 or 8 modules per CPU bank
Note: Two processors are required to populate more than 8 memory modules.
Graphic Subsystem:
BMC (IPMI) integrated Aspeed AST2400 VGA (DB-15)
Hard Disk Subsystem:
Up to twelve (12) SATA or SAS 3.5in hard drives. These drives can be configured as standalone units or hardware RAID.
Storage Controllers:
Ten (10) SATA3 6Gbs ports via C612 chipset
3Ware Escalade 9750-4i SAS2/SATA 6Gbs RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x8, 512MB DDR2-800 ECC cache, optional Battery Backup Unit (BBU)
CD-ROM Subsystem:
None
Sound Subsystem:
None
Network Subsystem:
(2893-SR) Onboard Intel i350 Dual-port PCI-Express Gigabit Ethernet controller, 1000BaseTX, RJ-45
(2893-SRT) Onboard Intel X540 Dual-port PCI-Express 10Gigabit Ethernet controller, 10GBase-T, RJ-45
Onboard in-band and out-of-band remote server management (over LAN, IPMI 2.0) with dedicated LAN
System Slots:
Three (3) PCI Express x16 (v3.0) slots, low profile
Three (3) PCI Express x8 (v3.0) slots, low profile
Note: Two processors are required to support expansion slots 4,5,6
System I/O:
One (1) RS-232C 16550 serial port
One (1) DB-15 VGA port
Two (2) USB 3.0 ports
Two (2) USB 2.0 ports
Two (2) RJ-45 Ethernet ports
One (1) RJ-45 Ethernet port (IPMI only)
Mouse:
Optional
Keyboard:
Optional
Chassis:
ASL 2U Rack mount chassis, FCC Class B
Chassis and CPU overheat alarm with front LED indication
Air Shroud and copper-based CPU heatsinks (active design)
920W EPS12V redundant & hotswap power supply, 80Plus Platinum Level, 94% efficiency
Dimensions: 3.5" (H) x 17.2" (W) x 25.5" (D)
One (1) SAS2 backplane with single LSI SAS2X28 expander
Twelve (12) 3.5in hotswap hard drive bays
(Optional) Two (2) 2.5in hotswap hard drive bays (rear access)
Three (3) 8cm hotswap cooling fans
Tool-less sliding rail kit with quick release
Preinstalled Software:
Fedora, Ubuntu or CentOS 64-bit operating system