Sovereign 3850 Specifications.

Motherboard:
Supermicro X6DHE-XG2 motherboard

CPU:
Intel Xeon processors, Nocona core, 1M full speed L2 cache, 800MHz Quad Pumped FSB, NetBurst micro-architecture, HyperThreading (SMT), EM64T, Socket 604

Intel Xeon processors, Irwindale core, 2M full speed L2 cache, 800MHz Quad Pumped FSB, NetBurst micro-architecture, HyperThreading (SMT), EM64T, Socket 604

Chipset:
Intel E7520 Lindenhurst server chipset
Intel ICH5R Southbridge and PCI-X Hub (PXH)
Dual channel DDR2-400 support 6.4GB/s memory bandwidth
Dual channel UltraDMA/100 bus mastering IDE controllers
Dual channel Serial ATA controller on ICH5R1 South Bridge

Memory Subsystem:
Eight DIMM banks supporting up to 16GB DDR2-400 ECC registered memory, single or dual channel memory access

Note: To enable dual channel memory (128-bit), modules must be populated in pairs.

Graphic Subsystem:
Integrated ATI Rage XL 8MB

Hard Disk Subsystem:
Up to twelve Serial ATA hard drives in capacity from 80GB to 500GB. These drives can be configured as standalone unit or hardware RAID, level 0, 1, 5, 10, hotspare supported

ATA Subsystem:
Integrated dual channel Ultra ATA/100 controllers

SCSI Subsystem:
(3850-TR) One 3Ware Escalade 9500S-12MI Serial ATA RAID controller, Multi-lane, RAID level 0, 1, 5, 10 & JBOD, 64-bit/66mhz, 128MB ECC cache, optional Battery Backup Unit (BBU)

(3850-TR2) One 3Ware Escalade 9550SX-12MI Serial ATA II RAID controllers, RAID level 0, 1, 5, 10 & JBOD, 64-bit/133mhz PCI-X, 256MB ECC cache, optional Battery Backup Unit (BBU)

CD-ROM Subsystem:
Optional

Sound Subsystem:
None

Network Subsystem:
Integrated Intel 82546GB Dual port Gigabit Ethernet controller, 1000BaseTX, RJ-45

Optional Intelligent Platform Management Interface (IPMI 2.0) board

System Slots:
Two (2) 3.3V2 64-bit/100MHz bus mastering, full length PCI-X slots, PCI-X bus #1
One (1) 3.3V2 64-bit/133MHz bus mastering, full length PCI-X slot, PCI-X bus #2 (share with Gig LAN)
One (1) 3.3V2 64-bit/133MHz bus mastering, full length PCI-X slot, PCI-X bus #3
One (1) 3.3V2 64-bit/133MHz bus mastering, full length PCI-X slot, PCI-X bus #4
One (1) PCI Express x8 slot

System I/O:
One (1) RS-232C 16550 serial port
One (1) DB-15 VGA port
Two (2) USB 2.0 ports (rear)
Two (2) USB 2.0 ports (front)
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) RJ-45 Ethernet ports

Floppy Drive:
1.44MB floppy drive

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 3U Rack mount chassis, FCC Class B
One (1) slim CDROM bay
One (1) 5.25in drive bay
One (1) 3.5in drive bay
Copper-based active CPU heatsinks
650W hotswap and triple redundant EPS12V power supply
Dimensions: 5.25" (H) x 19" (W) x 27" (D)
Three Multi-lane SATA backplanes

  • Activity LED connector for each hard drive
  • Twelve (12) hotswap SATA 1" hard drive bays

Three (3) 8cm hotswap centered fans
Two (2) 4cm hotswap centered fans
Two (2) 6cm rear fans
26in Sliding rails kit (center/telco mounting optional)

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit operating system

  1. HostRAID is not supported under Linux.
  2. Slot is incompatible with 5V PCI add-on card.
Phone: 1.877.ASL.3535