Lancelot 2881 Specifications.
Node Specification:Motherboard:
(2881-T/SS/SR) Supermicro X10DRT-P server board, proprietory form factor
(2881-TT/SST/SRT) Supermicro X10DRT-PT server board, proprietory form factor
CPU:
Intel Xeon E5-2600 v4 series processors, up to 22 cores, up to 9.6GT/s QuickPath Interconnect, Broadwell-EP core, HyperThreading (SMT), Socket LGA2011-3
Intel Xeon E5-2600 v3 series processors, up to 18 cores, up to 9.6GT/s QuickPath Interconnect, Haswell-EP core, HyperThreading (SMT), Socket LGA2011-3
Chipset:
Intel C612 server chipset
Memory Subsystem:
Sixteen (16) 240-pin DIMM banks supporting up to 1TB DDR4 ECC registered memory, 8 memory slots per CPU bank, Dual channel memory bus
Note: Dual channel configuration requires 2, 4, 6 or 8 modules per CPU bank
Note: Two processors are required to populate more than 8 memory modules.
Graphic Subsystem:
BMC (IPMI) integrated Aspeed AST2400 VGA (DB-15)
Hard Disk Subsystem:
(2881-T/TT) Up to three (3) SATA 3.5in hard drives. These drives can be configured as standalone units or software RAID.
(2881-SS/SST) Up to three (3) SATA or SAS 3.5in hard drives. These drives can be configured as standalone units or software RAID.
(2881-SR/SRT) Up to three (3) SATA or SAS 3.5in hard drives. These drives can be configured as standalone units or hardware RAID.
Storage Controllers:
Ten (10) SATA3 6Gbs ports via C612 chipset
(2881-SS/SST) Supermicro BPN-ADP-S3008L-L6IP SAS3/SATA 12Gbps controller, Broadcom 3008
(2881-SR/SRT) Supermicro BPN-ADP-S3108L-H6IRP SAS3/SATA 12Gbps RAID controller, Broadcom 3108, RAID level 0, 1, 5, 6, 10
Note: Each node must be populated with two processors to access the LSI SAS controller
CD-ROM Subsystem:
None
Sound Subsystem:
None
Network Subsystem:
(2881-T/SS/SR) Onboard Intel i350-AM2 Dual-port PCI-Express Gigabit Ethernet controller, 1000Base-T, RJ-45
(2881-TT/SST/SRT) Onboard Intel X540 Dual-port PCI-Express 10Gigabit Ethernet controller, 10GBase-T, RJ-45
Onboard in-band and out-of-band remote server management (over LAN, IPMI 2.0) with dedicated LAN
System Slots:
One (1) PCI Express x16 (v3.0) slot, low profile, half length
System I/O:
One (1) RS-232C 16550 serial port
One (1) DB-15 VGA port
Two (2) USB 3.0 ports
Two (2) RJ-45 Ethernet ports
One (1) RJ-45 Ethernet port (IPMI only)
Mouse:
Optional
Keyboard:
Optional
Enclosure Specification:
Four (4) hotplug dual-processor nodes
(2881-SR) Supermicro SuperServer 6028TP-HC1R 2U Rack Server
(2881-SRT) Supermicro SuperServer 6028TP-HC1TR 2U Rack Server
(2881-SS) Supermicro SuperServer 6028TP-HC0R 2U Rack Server
(2881-SST) Supermicro SuperServer 6028TP-HC0TR 2U Rack Server
(2881-T) Supermicro SuperServer 6028TP-HTR 2U Rack Server
(2881-TT) Supermicro SuperServer 6028TP-HTTR 2U Rack Server
Air Shroud and copper-based CPU heatsinks (passive design)
Chassis and CPU overheat alarm with front LED indication
Dimensions: 3.47" (H) x 17.25" (W) x 30.0" (D)
2000W EPS12V redundant & hotswap power supply, 80Plus Platinum Level
SAS3 backplane with enclosure management
Twelve (12) 3.5in hotswap hard drive bays
Four (4) 8cm chassis cooling fans
Tool-less sliding rail kit with quick release
Preinstalled Software:
Fedora, Ubuntu or CentOS 64-bit operating system