Lancelot 2845 Specifications.
Motherboard:
Intel Mukilteo Core 2 Duo Server board, ATX form factor
CPU:
Intel® Core® 2 Duo processor, 2M or 4M L2 cache, 1066MHz Quad Pumped FSB, Socket 775, .065 micron, dual core
Intel® Core® 2 Duo Extreme processor, 4M L2 cache, 1066MHz Quad Pumped FSB, Socket 775, .065 micron, dual core
Intel® Core® 2 Quad Extreme processor, 4M+4M L2 cache, 1066MHz Quad Pumped FSB, Socket 775, .065 micron, quad core
Chipset:
Intel 3010 (Mukilteo-2P) server chipset with PXH-V I/O Bridge and ICH7R SouthBridge
Single channel UltraDMA/100 bus mastering IDE controller
Four channel SATAII controller on ICH7R South Bridge
Memory Subsystem:
Four DIMM banks supporting up to 8GB of DDR2-667 unbuffered ECC SDRAM, single or dual channel operation
Note: To enable dual channel memory (128-bit), modules must be populated in pairs.
Graphic Subsystem:
Onboard ATI ES1000 graphic accelerator with 16M video ram
Hard Disk Subsystem:
(2845-S) Up to six Ultra 320/m hard drives in capacity from 36GB to 300GB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID
(2845-T) Up to four Serial ATA hard drives in capacity from 80GB to 750GB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID
(2845-TR2) Up to six Serial ATA hard drives in capacity from 80GB to 750GB. These drives can be configured as standalone unit or disk array(s) using hardware RAID
ATA Subsystem:
Onboard single channel Ultra ATA/100 controller
SCSI Subsystem:
(2845-S) Onboard Adaptec 7901W single channel Ultra 320/m SCSI controller
(2845-TR2) 3Ware Escalade 9650SE-8LPML Serial ATA II RAID controller, RAID level 0, 1, 5, 6, 10 & JBOD, PCI-Express x4, 256MB DDR2-533 ECC cache, optional Battery Backup Unit (BBU)
CD-ROM Subsystem:
(2845-S/T) Combo DVD-ROM (16X) and CDROM (52X)/CDR (52X)/RW(24X) drive. Note: 24X slim CDROM can be used in order to preserve the 5.25in expansion drive bay for other peripheral such as tape drive or additional optical device.
(2845-TR2) 24X Ultra DMA/33 slim CDROM
2nd CDRW/DVD-ROM/DVD+RW can be added via the slim drive bay (2845-S/T) or regular 5.25in drive bay (2845-TR2)
Sound Subsystem:
None
Network Subsystem:
Onboard Intel 82573V and 82573L PCI-Express Gigabit Ethernet controllers, 1000Base-TX
Optional Intelligent Platform Management Interface (IPMI 2.0) board
System Slots: (low profile card only)
Two (2) 3.3V1 64-bit/133MHz bus mastering, full length PCI-X slot
Two (2) 3.3V1 64-bit/100MHz bus mastering, full length PCI-X slot
One (1) PCI Express x4 slot
One (1) IPMI 2.0 slot
System I/O:
One (1) RS-232C 16550 serial port
Two (2) USB 2.0 ports
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
One (1) 15-pin VGA port
Two (2) RJ-45 Ethernet ports
Floppy Drive:
1.44MB floppy drive
Mouse:
Optional
Keyboard:
Optional
Chassis:
ASL 2U Rack mount chassis, FCC Class B
Copper-based active CPU heatsink
(2845-S/T) 550W fixed EPS12V power supply
(2845-TR2) 500W hotswap and redundant power supply
Chassis and CPU overheat alarm with front LED indication
Dimensions: 3.5" (H) x 16.7" (W) x 26" (D)
One (1) accessible slim size CDROM bay
One (1) accessible floppy bay
One (1) accessible 5.25" drive bay
(2845-S) Ultra 320/m SCA backplane
- 1 SCSI channel of 6 drives
- SAF-TE optional
- Six (6) hotswap SCA-2 1" hard drive bays
- Six (6) coldswap/hotswap Serial ATA drive bays on 2845-TR2
- Four (4) coldswap/hotswap Serial ATA drive bays on 2845-T
Four (4) 8cm hotswap fans
Sliding rails kit with telco mount support
Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit operating system
- Slot is incompatible with 5V PCI add-on card.