Lancelot 1865 Specifications.

Motherboard:
Intel 5000V Blackford VS server board, ATX form factor

CPU:
Intel Dual Core Xeon processors (Woodcrest), 2M+2M full speed L2 cache, 1066MHz or 1333mhz Quad Pumped FSB, Core micro-architecture, HyperThreading (SMT), EM64T, Socket LGA771

Intel Quad Core Xeon processors (Clovertown), 4M+4M full speed L2 cache, 1066MHz or 1333mhz Quad Pumped FSB, Core micro-architecture, HyperThreading (SMT), EM64T, Socket LGA771

Chipset:
Intel 5000V Blackford VS server chipset
Intel ESB2 Enterprise Southbridge and PCI-X Hub (PXH-V)
ESB2 6-port SATA II controller with HostRAID1
Single Ultra ATA/100 IDE controller supporting two UDMA devices

Memory Subsystem:
Six 240-pin DIMM banks supporting up to 16GB DDR2-667 ECC FB-DIMM memory, 667mhz, 128-bit memory bus

Note: Memory modules must be populated in pairs.

Graphic Subsystem:
Onboard ATI ES1000 VGA controller with 16M display ram

Hard Disk Subsystem:
Up to two Serial ATA hard drives in capacity from 80GB to 750GB. These drives can be configured as standalone unit or disk array(s) using the Linux software RAID.

ATA Subsystem:
Onboard single channel Ultra ATA/100 controller

SCSI Subsystem:
None

CD-ROM Subsystem:
8X slim DVD-ROM optical reader

Sound Subsystem:
None

Network Subsystem:
Onboard Intel 82563EB (Gilgal) Dual port PCI-Express Gigabit Ethernet controllers, 1000BaseTX, RJ-45
Optional Intelligent Platform Management Interface (IPMI 2.0) board

System Slots:
One (1) 3.3V2 64-bit/133MHz PCI-X slot

System I/O:
One (1) RS-232C 16550 serial port (COM A)
One (1) DB-15 VGA port
Two (2) USB 2.0 ports
One (1) PS/2 Mini DIN keyboard port
One (1) PS/2 Mini DIN mouse port
Two (2) RJ-45 Ethernet ports

Floppy Drive:
None

Mouse:
Optional

Keyboard:
Optional

Chassis:
ASL 1U Rack mount chassis, FCC Class B
Air Shroud and copper-based CPU heatsinks (passive design)
520W EPS12V fixed power supply with active PFC
Chassis and CPU overheat alarm with front LED indication
Dimensions: 1.7" (H) x 16.8" (W) x 22.6" (D)
One (1) accessible slim size CDROM bay (used)
Serial ATA II/SAS backplane with enclosure management
Two (2) hotswap Serial ATA hard drive bays
Two (2) 10cm 5K RPM chassis blowers
Sliding rails kit with telco mount support

Preinstalled Software:
Red Hat Linux with ASL optimized kernel, 32-bit or 64-bit operating system

  1. HostRAID is not supported under Linux.
  2. Slot is incompatible with 5V PCI add-on card.
Phone: 1.877.ASL.3535